top of page
  • UCS-502 is a water-based acrylic sealer designed to create a transparent, non-yellowing protective coating on concrete surfaces.
  • UV-resistant, and abrasion-resistant film.
  • It provides effective protection against moisture penetration, staining, dirt, dust, and wear.

  • It results in a surface that is easy to clean and maintain.

  • UCS-502 is suitable for both indoor and outdoor use, making it ideal for various applications.

  • It can be used to seal concrete, masonry, pavers, brick, saltillo tiles, and other cementitious substrates.

  • This product demonstrates excellent resistance to water, alkali substances, and efflorescence.

  • It ensures long-lasting durability, particularly in outdoor environments.

  • UCS-502 exhibits strong adhesion to a wide range of substrates, increasing its versatility and compatibility.

  • It can be applied in diverse situations and on different surfaces.

UCS-502 | High Concentration Sealer (Acrylic)

327,00$Precio
  • Volume: 5 Gallon (A)

    Contents: A=Sealer B=Water

    Mixed Ratio by Volume: 1A : 3B 

    Maximum Volume: 20 Gallon 

  • SURFACE PREPARATION 

    • Paint, oil residues, or latex on the surface to be treated must be thoroughly removed using appropriate equipment. 
    • Clean the surface before construction.
    • Concrete with cracks or structural defects larger than 2mm should be properly repaired before construction. 
    • Surfaces with moisture can be coated, but Surfaces completely soaked in water or with standing water cannot be coated. 
    • The Surface must be dried to allow penetration of the hardner. 
    • For new concrete, it is recommended to wait a minimum of 28 days for curing before application.

     

    WORKING CONDITIONS

    • Perform the construction on concrete surfaces with temperatures ranging from 5 to 35ºC. 
    • Do not perform the application on days with fast evaporation of the hardener, freezing conditions where the hardener could freeze, anticipated rainy weather, or days with strong winds.

     

    APPLICATION

    • Apply an appropriate amount of the reinforcing agent evenly and sufficiently to the concrete surface using a low-pressure sprayer. 
    • Only apply enough to ensure that the reinforcing agent does pool on the surface.
    • If the reinforcing agent accumulates on the surface, immediately remove it using a trower or roller. 
    • Avoid excessive application. Excessively applying the reinforcing agent can result in the formation of white spots and dust on the surface as it dries.

Best Offers

bottom of page