- UCS-502 is a water-based acrylic sealer designed to create a transparent, non-yellowing protective coating on concrete surfaces.
- UV-resistant, and abrasion-resistant film.
It provides effective protection against moisture penetration, staining, dirt, dust, and wear.
It results in a surface that is easy to clean and maintain.
UCS-502 is suitable for both indoor and outdoor use, making it ideal for various applications.
It can be used to seal concrete, masonry, pavers, brick, saltillo tiles, and other cementitious substrates.
This product demonstrates excellent resistance to water, alkali substances, and efflorescence.
It ensures long-lasting durability, particularly in outdoor environments.
UCS-502 exhibits strong adhesion to a wide range of substrates, increasing its versatility and compatibility.
It can be applied in diverse situations and on different surfaces.
UCS-502 | High Concentration Sealer (Acrylic)
Volume: 5 Gallon (A)
Contents: A=Sealer B=Water
Mixed Ratio by Volume: 1A : 3B
Maximum Volume: 20 Gallon
SURFACE PREPARATION
- Paint, oil residues, or latex on the surface to be treated must be thoroughly removed using appropriate equipment.
- Clean the surface before construction.
- Concrete with cracks or structural defects larger than 2mm should be properly repaired before construction.
- Surfaces with moisture can be coated, but Surfaces completely soaked in water or with standing water cannot be coated.
- The Surface must be dried to allow penetration of the hardner.
- For new concrete, it is recommended to wait a minimum of 28 days for curing before application.
WORKING CONDITIONS
- Perform the construction on concrete surfaces with temperatures ranging from 5 to 35ÂșC.
- Do not perform the application on days with fast evaporation of the hardener, freezing conditions where the hardener could freeze, anticipated rainy weather, or days with strong winds.
APPLICATION
- Apply an appropriate amount of the reinforcing agent evenly and sufficiently to the concrete surface using a low-pressure sprayer.
- Only apply enough to ensure that the reinforcing agent does pool on the surface.
- If the reinforcing agent accumulates on the surface, immediately remove it using a trower or roller.
- Avoid excessive application. Excessively applying the reinforcing agent can result in the formation of white spots and dust on the surface as it dries.
